Seite 1 von 1
system lahmt
Verfasst:
21.03.2007, 19:54
von Gast
hallöchen allerseits,
ich bräuchte eure hilfe
bei der verwendung von kubuntu edgy merke ich das es amnchmal nicht so fließend läuft, das heißt das die fenster beim verschieben rukeln etc.
ich denke das ich vielleicht nicht genug treiber installiert habe bzw mein system nicht richtig eingestellt habe.
folgene komponenten sitzen in meinem system:
intel core 2 duo e6600 (64bit)
nvidia nforce 680i sli mainboard
geforce 8800gtx grafikkarte
iiyama e2200ws monitor
verwende kernel 2.6.17-11-generic und hab bis jetzt nur nen graka treiber installiert den ich von der nvidia website habe (und hier in einem howto verlinkt ist). das nvidia-glx packet ist deswegen nicht installiert.
wie krieg ich meine system fließender?
diese frage hab ich schonmal in einem forum gestellt und bekam folgende antwort:
Bitte an das Ende deiner /etc/X11/xorg.conf die Zeilen
Section "Extensions"
Option "Composite" "Enable"
EndSection
anhängen. ..grafische Oberfläche neu starten-- im KDE-Kontrollzentrum den Haken bei "Transparenz/Schatten" reinmachen...Wenns jetzt immer noch nicht besser ist, geh im K-Menü (dauf "Befehl ausführen", gib kwin --replace ein und drück Enter...
nach dem befehl kwin --replace ist es aber ein wenig schlimmer geworden mit dem ruckeln.
auf hilfe würde ich mich sehr freuen
liebe grüße
der chillahaze
p.s. zu erwähenen währe noch noch das ich n linux-newbi bin, was man auch merkt:)
Verfasst:
21.03.2007, 20:09
von ing0
ich würde mal tippen dfas deine graka noch nicht richtig installiert ist
Verfasst:
21.03.2007, 20:11
von Gast
was könnt ich falsch gemacht haben? vor dem login bioldschirm erscheint das nvidia logo und im kmenu erscheint ein x server settings menu von nvidia..
Verfasst:
21.03.2007, 20:16
von ing0
poste doch mal bitte deine xorg.conf
Verfasst:
21.03.2007, 20:42
von Gast
- Code: Alles auswählen
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Mon Feb 26 23:37:58 PST 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
//Modedit(
theDeus): "CODE" eingefügt
Verfasst:
26.03.2007, 00:07
von Gast
mit xfce keineprobleme
Verfasst:
26.03.2007, 00:55
von Bauer87
...ih hatte schon immer das Gefühl, das KDE einfach ruckelt. Ich weiß nicht warum, aber für mich fühlt es sich träger an als Gnome und XFCE. Bis auf den Graka-Treiber muss man normalerweise nichts installieren und für sämtlichen Effekte, die es so gibt, sollt dein System auch schnell genug sein. Es wäre zwar nen Versuch wert, die runter zu stellen, aber das sollte nicht nötig sein. Wie gesagt: Bestimmt einfach die KDE-Grundträgheit.
Verfasst:
26.03.2007, 15:02
von Gast
ja das ist auch mine vermutung..
ich verwende jetzt xfce xgl mit beryl und ich kann noch so die fenster hin und her rüteln es lahm nicht und xorg beansprucht bei dieser lasst nur aller maximal 10% der cpu. im vergleich bei KDE warens 80%.
außerdem ist xfce eher mein ding:)