Grafik geht nicht über 640*480

Hier kommt alles rein, was die restliche Software des Systems angeht.

Moderator: Moderator

Beitragvon Kagenyu » 24.10.2007, 11:52

[align=left]Entschuldigt den Doppelpost, aber es ist ein "neues" Problem aufgetreten. Dieses Mal habe ich aber glaub ich alle Informationen zusammen getragen :D

Folgendes Problem: Ich hätte die Auflösung gerne auf 1152*864@75Hz. Ist auch soweit kein Problem, obwohl folgende Fehler in der Konsole gelistet werden, wenn ich nvidia-settings starte:
Code: Alles auswählen
flow@flow:~$ sudo nvidia-settings   
ERROR: Cannot open display flow:0.0.   
ERROR: Unable to assign attribute DigitalVibrance specified on line 19 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute SyncToVBlank specified on line 20 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute AllowFlipping specified on line 21 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute LogAniso specified on line 22 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute FSAA specified on line 23 of configuration    file /home/flow/.nvidia-settings-rc (no Display connection).   
ERROR: Unable to assign attribute TextureSharpen specified on line 24 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute ForceGenericCpu specified on line 25 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute GammaCorrectedAALines specified on line 26 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   ERROR: Unable to assign attribute CursorShadow specified on line 27 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute CursorShadowXOffset specified on line 28 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute CursorShadowYOffset specified on line 29 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute CursorShadowAlpha specified on line 30 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute CursorShadowRed specified on line 31 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute CursorShadowGreen specified on line 32 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute CursorShadowBlue specified on line 33 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute FSAAAppControlled specified on line 34 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute LogAnisoAppControlled specified on line 35 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute FSAAAppEnhanced specified on line 36 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute RedBrightness specified on line 37 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute GreenBrightness specified on line 38 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute BlueBrightness specified on line 39 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute RedContrast specified on line 40 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute GreenContrast specified on line 41 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute BlueContrast specified on line 42 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute RedGamma specified on line 43 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute GreenGamma specified on line 44 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute BlueGamma specified on line 45 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute OpenGLImageSettings specified on line 46 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute XVideoTextureBrightness specified on line 47    of configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   ERROR: Unable to assign attribute XVideoTextureContrast specified on line 48 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).   
ERROR: Unable to assign attribute XVideoTextureSyncToVBlank specified on line    49 of configuration file /home/flow/.nvidia-settings-rc (no Display    connection).
ERROR: Unable to assign attribute XVideoSyncToDisplay specified on line 50 of    configuration file /home/flow/.nvidia-settings-rc (no Display    connection).


Leider weiß ich nicht, was sie bedeuten und Google spuckt auch nichts brauchbares aus :(

Auf jeden Fall lässt sich die Auflösung ändern, aber sie bleibt nicht. Sobald der X-Server neu gestartet wird (ist doch der X-Server mit STRG+ALT+BACKSPACE, oder?), bin ich wieder auf 1024*768.

Der treffende Teil der xorg.conf dürfte der hier sein:

Code: Alles auswählen
Section "Screen"
Identifier "Default Screen"
Device     "nVidia Corporation G80 [GeForce 8800 GTS]"
Monitor    "Standardbildschirm"
DefaultDepth24 Option     "AddARGBVisuals" "True"
Option     "AddARGBGLXVisuals" "True"
Option     "NoLogo" "True"
SubSection "Display"     Depth   1     Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"     Depth   4     Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"     Depth   8     Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"     Depth   15     Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"     Depth   16     Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"     Depth   24     Modes  "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection


Das "1152*864" habe ich bereits selbst eingefügt ohne Erfolg. Mir ist jedoch noch diese Zeile aufgefallen:
Code: Alles auswählen
# Removed Option "metamodes" "1152x864_75 +0+0; 800x600 +0+0; 640x480 +0+0"

Darunter steht allerdings
Code: Alles auswählen
Option "metamodes" "1152x864 +0+0; 800x600 +0+0; 640x480 +0+0"

...also dürfte das doch aufgehoben sein, oder?

Editiert wegen Übersichtlichkeit
[/align]
Zuletzt geändert von Kagenyu am 24.10.2007, 12:05, insgesamt 1-mal geändert.
Wenn du glaubst, es geht nicht mehr, kommt von oben noch ein Stiefel her:uuh:

[url=http://www.publicons.de/]Bild[/url]
Benutzeravatar
Kagenyu
 
Beiträge: 156
Registriert: 21.04.2007, 16:03
Wohnort: GER, Bay

Beitragvon Kagenyu » 25.10.2007, 19:04

Wieder keiner? Hab dieses Mal alles beachtet und noch keine Hilfestellung erhalten :(
Wenn du glaubst, es geht nicht mehr, kommt von oben noch ein Stiefel her:uuh:

[url=http://www.publicons.de/]Bild[/url]
Benutzeravatar
Kagenyu
 
Beiträge: 156
Registriert: 21.04.2007, 16:03
Wohnort: GER, Bay

Beitragvon ChemicalBrother » 25.10.2007, 20:07

Ich habe kein nvidia und die anderen Ubuntu-User hier haben, glaube ich, auch alle ATI-Karten. Ich weiß nicht, ob dir in diesem Fall hier jemand weiterhelfen kann.
Benutzeravatar
ChemicalBrother
 
Beiträge: 5332
Registriert: 21.08.2006, 21:17
Wohnort: Langen
Lizenz: CC
Distribution: Arch Linux
Kernelversion: 6.0

Beitragvon Mark » 26.10.2007, 15:26

Ich bin zwar Nvidia-User aber ich weiß dir nicht wirklich zu helfen. Nur was halt auffält, dass deine Xorg.conf ziemlich durcheinander ist ?(
Versuch die vlt irgendwie wieder hinzubekommen :D
Hast du eigentlich schonmal mit neuinstallation des Treibers versucht?
http://www.traber-wintergarten.de/
Benutzeravatar
Mark
 
Beiträge: 746
Registriert: 30.09.2006, 01:23
Wohnort: Fulda
Lizenz: GPL
Distribution: Ubuntu

Beitragvon Kagenyu » 26.10.2007, 16:28

Habe ich versucht, aber immer bekomme immer denselben Fehler beim Deinstallieren.
Code: Alles auswählen
flow@flow:~$ sudo apt-get remove nvidia-*
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut      
Reading state information... Fertig
Achtung, wähle nvidia-kernel-100.14.19 für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-legacy-kernel-source für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-glx-dev für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-settings für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-new-kernel-source für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-cg-toolkit für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-glx-new für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-glx-src für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-common für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-1.0.7184 für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-1.0.7185 für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-glx-legacy-dev für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-1.0.8774 für reg. Ausdruck „nvidia-*“
Achtung, wähle xen-restricted-modules-2.6.17-6-generic-xen0 an Stelle von nvidia-kernel-1.0.8774
Achtung, wähle nvidia-glx-new-dev für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-1.0.9631 für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-xconfig für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-1.0.9639 für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-1.0.9755 für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-glx-legacy für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-source für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-kernel-src für reg. Ausdruck „nvidia-*“
Achtung, wähle nvidia-glx für reg. Ausdruck „nvidia-*“
E: Konnte Paket nvidia-* nicht finden

Hab es vorhin mal nochmal probiert und da hat es irgendwie funktioniert (es kam also Abfrage J/N) und danach habe ich den Treiber nochmal installiert. Hat aber nichts verändert. Nochmaliger Versuch endete wieder mit "Konnte Paket nvidia-* nicht finden" :(

Wie sieht denn eine ordentliche xorg.conf aus :( ?
Wenn du glaubst, es geht nicht mehr, kommt von oben noch ein Stiefel her:uuh:

[url=http://www.publicons.de/]Bild[/url]
Benutzeravatar
Kagenyu
 
Beiträge: 156
Registriert: 21.04.2007, 16:03
Wohnort: GER, Bay

Beitragvon Kyuu » 26.10.2007, 18:02

Lösch sie.
Dann wird eine neue erstellt und stell mal nur die wichtigsten Dinge von Hand ein.
Kyuu
 
Beiträge: 245
Registriert: 20.01.2007, 02:57

Beitragvon ChemicalBrother » 26.10.2007, 19:48

[quote=Kyuu,index.php?page=Thread&postID=22826#post22826]Lösch sie.
Dann wird eine neue erstellt und stell mal nur die wichtigsten Dinge von Hand ein.[/quote]

Sure? Ich glaube, dass muss man noch einstellen, dass einfach eine neue erstellt wird.
Benutzeravatar
ChemicalBrother
 
Beiträge: 5332
Registriert: 21.08.2006, 21:17
Wohnort: Langen
Lizenz: CC
Distribution: Arch Linux
Kernelversion: 6.0

Beitragvon Rufus » 27.10.2007, 12:01

[quote=Kagenyu,index.php?page=Thread&postID=22822#post22822]Wie sieht denn eine ordentliche xorg.conf aus ?[/quote]Hi,
ich weiß zwar nicht, wie eine ordentlich xorg.conf ausschaut, aber meine schaut so aus, ist nur die Screen Section:

Code: Alles auswählen
Section "Screen"
   Identifier    "Default Screen"
   Device        "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
   Monitor       "Generic Monitor"
   DefaultDepth   24
   Option        "AddARGBGLXVisuals" "True"
   SubSection    "Display"
       Depth      1
       Modes     "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection    "Display"
       Depth      4
       Modes     "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection    "Display"
       Depth      8
       Modes     "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection    "Display"
       Depth      15
       Modes     "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection    "Display"
       Depth      16
       Modes     "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection    "Display"
       Depth      24
       Modes     "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection


Versuch doch mal deinen GraKa Treiber mit Hilfe von envy zu installieren, denn envy legt eine gute xorg.conf an. Ich hab bei mir nur die "1280x1024" hinzugefügt. Vll hilfts ja :)


mfg Rufus
Board: MSI K9N Neo-F V3, CPU: AMD Athlon 64 X2 4800+, Grafikk.: NVidia GeForce 8800 GTS 320 MBT, Arbeitsspeicher: 2x 1024 MB, Monitor: iiyama ProLite E435S, Maus: Logitech Optical , Tastatur: Standard PS2
Benutzeravatar
Rufus
 
Beiträge: 124
Registriert: 07.02.2007, 22:12
Wohnort: München

Beitragvon Kyuu » 27.10.2007, 13:53

Pretty Sure ;)

War bisher auf allen meinen Distris so, dass wenn meine Xorg.conf auf Urlaub war, X eine neue erstellt hat.

Kommplett standart halt und manchmal funzt die halt auch nicht, weil z.B. bei Radeon Karten ati als Treiber eingesetzt wird und zumindest bei mir so gut wie nie funzt :D
Deshalb sagte ich ja, dass man dann halt einfach die minimal wichtigsten Einstellungen von Hand ändern soll.
Kyuu
 
Beiträge: 245
Registriert: 20.01.2007, 02:57

Vorherige

Zurück zu Sonstige Software

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste

cron