Kernel Kaputt?

Hier geht es um Hardware/Peripherie. Probleme, neue Treiber... werden hier diskutiert.

Moderator: Moderator

Kernel Kaputt?

Beitragvon fps_berserker » 21.02.2007, 14:33

So, schluss mit lustig, mein scheiss PC funzt offenbar echt nur noch mit XP

Suse > Bootet nichtmals richtig, außer das sich ein schwarzes fenster im Boot schirm öffnet

Fedora > Da bekommt er Kernel Panic

Ubuntu > Läuft alles nur der PC bekommt fglrx zum verrecken nicht hinne

Foresight > Installiert zwar, aber fährt nicht mehr hoch

So langsam gehen mir die Distrubtionen aus. Also bei meiner Kiste scheint irgendwas nicht zu stimmen!
Zuletzt geändert von fps_berserker am 21.02.2007, 14:34, insgesamt 1-mal geändert.
Benutzeravatar
fps_berserker
 
Beiträge: 232
Registriert: 22.11.2006, 12:19

Beitragvon datkev » 21.02.2007, 14:37

Hatte so etwas ähnliches mal wegen einer defekten Festplatte.

Und ein weiteres mal wegen nem defekten RAM Riegel.
Webspace bei https://www.wdl-bochum.de | Hardware von https://www.snogard.de | Linuxgaming @Facebook
Benutzeravatar
datkev
 
Beiträge: 739
Registriert: 19.09.2006, 15:22
Wohnort: Bochum
Lizenz: CC BY-SA 3.0
Distribution: Debian
Kernelversion: 3.x

Beitragvon fps_berserker » 21.02.2007, 14:41

Original von datkev
Hatte so etwas ähnliches mal wegen einer defekten Festplatte.

Und ein weiteres mal wegen nem defekten RAM Riegel.


Aber so läuft mein PC mit XP wie geschmiert! Kein Plan warum er diese Zicken macht, werd mich nachm Sommer mal nach einem neuen umschauen müssen!
Benutzeravatar
fps_berserker
 
Beiträge: 232
Registriert: 22.11.2006, 12:19

Beitragvon Mark » 21.02.2007, 15:15

Hi
Eh wenn du schon beim Probieren bist , haste schonmal Debian ??
Falls dir das nicht gefällt , schau dir vlt mal Dreamlinux an . Das basiert auf Debian , und ist von der Ausstattung nicht schlecht . Nutzt Xfce und ich habe gelesen dass dort für Nvidia und ATI - User ein einfaches installationsscript dabei ist . Naja kannst ja selbst mal schaun :D Website

Mfg Mark
http://www.traber-wintergarten.de/
Benutzeravatar
Mark
 
Beiträge: 746
Registriert: 30.09.2006, 01:23
Wohnort: Fulda
Lizenz: GPL
Distribution: Ubuntu

Beitragvon fps_berserker » 21.02.2007, 18:36

Original von Mark26
Hi
Eh wenn du schon beim Probieren bist , haste schonmal Debian ??
Falls dir das nicht gefällt , schau dir vlt mal Dreamlinux an . Das basiert auf Debian , und ist von der Ausstattung nicht schlecht . Nutzt Xfce und ich habe gelesen dass dort für Nvidia und ATI - User ein einfaches installationsscript dabei ist . Naja kannst ja selbst mal schaun :D Website

Mfg Mark


Mit Debian bin ich noch nicht vertraut :) Aber ich werde mir mal Dreamlinux annehmen! Danke
Benutzeravatar
fps_berserker
 
Beiträge: 232
Registriert: 22.11.2006, 12:19

Beitragvon fps_berserker » 21.02.2007, 18:43

Ist Dreamlinux nur auf Englisch?
Benutzeravatar
fps_berserker
 
Beiträge: 232
Registriert: 22.11.2006, 12:19

Beitragvon datkev » 21.02.2007, 18:55

Jaein :=)

Es ist auf Englisch, kannst aber vieles, nicht alles, auf deutsch umstellen.

Steht dort aber auch beschrieben.

Ich allerdings habe nur Probleme mit der Installation von Dreamlinux gehabt.
Vor allem nachdem ich mal partitioniert hatte. ;)
Webspace bei https://www.wdl-bochum.de | Hardware von https://www.snogard.de | Linuxgaming @Facebook
Benutzeravatar
datkev
 
Beiträge: 739
Registriert: 19.09.2006, 15:22
Wohnort: Bochum
Lizenz: CC BY-SA 3.0
Distribution: Debian
Kernelversion: 3.x

Beitragvon Mark » 21.02.2007, 18:56

Also es gibt keine sonderlich gute übersetzung , aber beim booten ist dort eine Komandozeile und dort steht lang=us und dann einfach das us gegen de eintauschen oder das eingeben ,weiß nimmer genau ;)

Mfg Mark
http://www.traber-wintergarten.de/
Benutzeravatar
Mark
 
Beiträge: 746
Registriert: 30.09.2006, 01:23
Wohnort: Fulda
Lizenz: GPL
Distribution: Ubuntu

Beitragvon fps_berserker » 21.02.2007, 19:09

naja von solchen Experimenten lass ich lieber die Finger, hab mich im Momment genug geärgert. Linux bringt mir keinen Spass mehr sondern eher Frust. Mein PC will einfach keine Distrubtion zum laufen bekommen! Muss wohl auf nen neuen sparen
Benutzeravatar
fps_berserker
 
Beiträge: 232
Registriert: 22.11.2006, 12:19

Beitragvon Swissren » 21.02.2007, 20:33

Wieviele Ram-Riegel hast du denn drinnen? Wenn du mehr wie einen hast, nimm mal einen raus und porbiere es dann noch mals. Wenn immer noch Fehler auftreten, den anderen raus und den ersten Riegel wieder rein. Als nächstes die Festplatten. Wenn dann immer noch Fehler kommen, liegts wahrscheinlich am Mainboard.

Ich nehme allerdings an, dass es die Rams sind. Ich hab mal gehört, dass XP diese zuerst kontrolliert, und wenn kaputte Sektoren (?) erkannt werden, werden die nicht benutzt, um Fehler zu vermeiden. Der Linux Kernel tue dies aber nicht (weiss es jemand genauer?).
Benutzeravatar
Swissren
 
Beiträge: 125
Registriert: 14.01.2007, 15:19
Wohnort: CH

Beitragvon fps_berserker » 21.02.2007, 21:42

So also ich hab meine ATI Grafikkarte zum laufen bekommen. Hab den ATI trieber von der ATI hauptseite runtergeladen und hab noch zusätzlich den treiber aus den Paketquellen installiert, dann ging es erst. problem is nur das die Bildschirmauflösung nicht höher geht als 1024x768

Jemand eine idee?
Benutzeravatar
fps_berserker
 
Beiträge: 232
Registriert: 22.11.2006, 12:19

Beitragvon Cheeky@Boinc » 21.02.2007, 21:45

von der ATI hauptseite runtergeladen und hab noch zusätzlich den treiber aus den Paketquellen installiert


Bitte nicht nachmachen !!

Da hat was anderes nicht gestimmt aber das ist keine Lösung !

Jemand eine idee?


Poste deine xorg.conf doch einmal hier !
<3 SuL <3
Benutzeravatar
Cheeky@Boinc
 
Beiträge: 7388
Registriert: 28.06.2006, 14:19
Wohnort: Werther
Lizenz: GPL

Beitragvon fps_berserker » 21.02.2007, 22:07

Code: Alles auswählen
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/X11/fonts/misc"
   FontPath   "/usr/share/X11/fonts/cyrillic"
   FontPath   "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/Type1"
   FontPath   "/usr/share/X11/fonts/100dpi"
   FontPath   "/usr/share/X11/fonts/75dpi"
   FontPath   "/usr/share/fonts/X11/misc"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "de"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ExplorerPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
   Driver      "fglrx"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
   HorizSync   28-51
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
   Monitor      "Generic Monitor"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus" "SendCoreEvents"
   InputDevice     "cursor" "SendCoreEvents"
   InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection

Section "ServerFlags"
        Option  "AIGLX" "off"
EndSection

Section "Extensions"
        Option "Composite" "Disable"
EndSection
Benutzeravatar
fps_berserker
 
Beiträge: 232
Registriert: 22.11.2006, 12:19

Beitragvon Cheeky@Boinc » 21.02.2007, 22:10

Hier:


Code: Alles auswählen
SubSection "Display"
      Depth      1
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
EndSection


..fügst du einfach gewünschte Modi hinzu ! Also zb.

..statt:

"1024x768" "800x600" "640x480"

halt:

"1280x720" "1024x768" "800x600" "640x480"

Speichern, x neustarten.
Die datei muss aber als root bearbeitet werden ;) Also "sudo" nicht vergessen.
<3 SuL <3
Benutzeravatar
Cheeky@Boinc
 
Beiträge: 7388
Registriert: 28.06.2006, 14:19
Wohnort: Werther
Lizenz: GPL

Beitragvon fps_berserker » 21.02.2007, 23:33

Code: Alles auswählen
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/X11/fonts/misc"
   FontPath   "/usr/share/X11/fonts/cyrillic"
   FontPath   "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/Type1"
   FontPath   "/usr/share/X11/fonts/100dpi"
   FontPath   "/usr/share/X11/fonts/75dpi"
   FontPath   "/usr/share/fonts/X11/misc"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "de"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ExplorerPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
   Driver      "fglrx"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
   HorizSync   28-51
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
   Monitor      "Generic Monitor"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1280 × 1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1280x720" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1280x720" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1280x720" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1280x720" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1280x720" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus" "SendCoreEvents"
   InputDevice     "cursor" "SendCoreEvents"
   InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection

Section "ServerFlags"
        Option  "AIGLX" "off"
EndSection

Section "Extensions"
        Option "Composite" "Disable"
EndSection


Habs gemacht. Hab auch neu gestartet aber dann Pustekuchen, geht immer nur noch bis 1024x768
Benutzeravatar
fps_berserker
 
Beiträge: 232
Registriert: 22.11.2006, 12:19

Nächste

Zurück zu Hardware/Peripherie

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste

cron