Seite 1 von 2
Kernel Kaputt?
Verfasst:
21.02.2007, 14:33
von fps_berserker
So, schluss mit lustig, mein scheiss PC funzt offenbar echt nur noch mit XP
Suse > Bootet nichtmals richtig, außer das sich ein schwarzes fenster im Boot schirm öffnet
Fedora > Da bekommt er Kernel Panic
Ubuntu > Läuft alles nur der PC bekommt fglrx zum verrecken nicht hinne
Foresight > Installiert zwar, aber fährt nicht mehr hoch
So langsam gehen mir die Distrubtionen aus. Also bei meiner Kiste scheint irgendwas nicht zu stimmen!
Verfasst:
21.02.2007, 14:37
von datkev
Hatte so etwas ähnliches mal wegen einer defekten Festplatte.
Und ein weiteres mal wegen nem defekten RAM Riegel.
Verfasst:
21.02.2007, 14:41
von fps_berserker
Original von datkev
Hatte so etwas ähnliches mal wegen einer defekten Festplatte.
Und ein weiteres mal wegen nem defekten RAM Riegel.
Aber so läuft mein PC mit XP wie geschmiert! Kein Plan warum er diese Zicken macht, werd mich nachm Sommer mal nach einem neuen umschauen müssen!
Verfasst:
21.02.2007, 15:15
von Mark
Hi
Eh wenn du schon beim Probieren bist , haste schonmal Debian ??
Falls dir das nicht gefällt , schau dir vlt mal Dreamlinux an . Das basiert auf Debian , und ist von der Ausstattung nicht schlecht . Nutzt Xfce und ich habe gelesen dass dort für Nvidia und ATI - User ein einfaches installationsscript dabei ist . Naja kannst ja selbst mal schaun
WebsiteMfg Mark
Verfasst:
21.02.2007, 18:36
von fps_berserker
Original von Mark26Hi
Eh wenn du schon beim Probieren bist , haste schonmal Debian ??
Falls dir das nicht gefällt , schau dir vlt mal Dreamlinux an . Das basiert auf Debian , und ist von der Ausstattung nicht schlecht . Nutzt Xfce und ich habe gelesen dass dort für Nvidia und ATI - User ein einfaches installationsscript dabei ist . Naja kannst ja selbst mal schaun
WebsiteMfg Mark
Mit Debian bin ich noch nicht vertraut
Aber ich werde mir mal Dreamlinux annehmen! Danke
Verfasst:
21.02.2007, 18:43
von fps_berserker
Ist Dreamlinux nur auf Englisch?
Verfasst:
21.02.2007, 18:55
von datkev
Jaein :=)
Es ist auf Englisch, kannst aber vieles, nicht alles, auf deutsch umstellen.
Steht dort aber auch beschrieben.
Ich allerdings habe nur Probleme mit der Installation von Dreamlinux gehabt.
Vor allem nachdem ich mal partitioniert hatte.
Verfasst:
21.02.2007, 18:56
von Mark
Also es gibt keine sonderlich gute übersetzung , aber beim booten ist dort eine Komandozeile und dort steht lang=us und dann einfach das us gegen de eintauschen oder das eingeben ,weiß nimmer genau
Mfg Mark
Verfasst:
21.02.2007, 19:09
von fps_berserker
naja von solchen Experimenten lass ich lieber die Finger, hab mich im Momment genug geärgert. Linux bringt mir keinen Spass mehr sondern eher Frust. Mein PC will einfach keine Distrubtion zum laufen bekommen! Muss wohl auf nen neuen sparen
Verfasst:
21.02.2007, 20:33
von Swissren
Wieviele Ram-Riegel hast du denn drinnen? Wenn du mehr wie einen hast, nimm mal einen raus und porbiere es dann noch mals. Wenn immer noch Fehler auftreten, den anderen raus und den ersten Riegel wieder rein. Als nächstes die Festplatten. Wenn dann immer noch Fehler kommen, liegts wahrscheinlich am Mainboard.
Ich nehme allerdings an, dass es die Rams sind. Ich hab mal gehört, dass XP diese zuerst kontrolliert, und wenn kaputte Sektoren (?) erkannt werden, werden die nicht benutzt, um Fehler zu vermeiden. Der Linux Kernel tue dies aber nicht (weiss es jemand genauer?).
Verfasst:
21.02.2007, 21:42
von fps_berserker
So also ich hab meine ATI Grafikkarte zum laufen bekommen. Hab den ATI trieber von der ATI hauptseite runtergeladen und hab noch zusätzlich den treiber aus den Paketquellen installiert, dann ging es erst. problem is nur das die Bildschirmauflösung nicht höher geht als 1024x768
Jemand eine idee?
Verfasst:
21.02.2007, 21:45
von Cheeky@Boinc
von der ATI hauptseite runtergeladen und hab noch zusätzlich den treiber aus den Paketquellen installiert
Bitte nicht nachmachen !!Da hat was anderes nicht gestimmt aber das ist
keine Lösung !
Jemand eine idee?
Poste deine xorg.conf doch einmal hier !
Verfasst:
21.02.2007, 22:07
von fps_berserker
- Code: Alles auswählen
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "AIGLX" "off"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Verfasst:
21.02.2007, 22:10
von Cheeky@Boinc
Hier:
- Code: Alles auswählen
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
..fügst du einfach gewünschte Modi hinzu ! Also zb.
..statt:
"1024x768" "800x600" "640x480"
halt:
"1280x720" "1024x768" "800x600" "640x480"
Speichern, x neustarten.
Die datei muss aber als root bearbeitet werden
Also "sudo" nicht vergessen.
Verfasst:
21.02.2007, 23:33
von fps_berserker
- Code: Alles auswählen
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV370 5B60 [Radeon X300 (PCIE)]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280 × 1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x720" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x720" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x720" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x720" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x720" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "AIGLX" "off"
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Habs gemacht. Hab auch neu gestartet aber dann Pustekuchen, geht immer nur noch bis 1024x768